Tyson Insulation Before & After Photos

Sandra reached out to us because her home in Clovis was experiencing extreme temperature fluctuations—stuffy and hot in the summer, cold and drafty in the winter. After a thorough attic inspection, we discovered the culprit: her attic had only two inches of fiberglass insulation, which was far below the recommended level. To address this issue and improve her home’s energy efficiency, we performed a full attic restoration.

Here’s what we did:

• Removed old insulation – We vacuumed out the existing two inches of fiberglass insulation to start with a clean slate.
• Sealed air leaks – Using closed-cell foam, we sealed top plates, registers, recessed lighting, and any other points where air could escape between the attic and the home’s living spaces.
• Sanitized the attic – We thoroughly cleaned and sanitized the attic to eliminate contaminants, allergens, and any potential odors.
• Installed rodent-proof barriers – To prevent future pest infestations, we sealed potential entry points.
• Added premium fiberglass insulation – We blew in fresh, high-quality fiberglass insulation to bring the attic up to the recommended R38 level.
• Provided before-and-after photos – Sandra received a full report with images showcasing the transformation.

Thanks to this attic restoration, Sandra will now enjoy a more comfortable home year-round, improved indoor air quality, and lower energy bills. Her HVAC system will also run more efficiently, leading to long-term savings.

Jeffrey contacted us with concerns about his home’s inconsistent temperatures and rising energy bills. Upon inspecting his attic, we found the culprit: only four inches of old, compacted fiberglass insulation that was no longer providing proper thermal protection. To boost his home’s comfort and energy efficiency, we recommended a full attic restoration.

We performed the following steps to restore the attic:

• Removed and safely disposed of the old, compacted fiberglass insulation.
• Sealed all air leaks using closed-cell foam, addressing areas such as top plates, registers, recessed lighting, smoke detectors, and plumbing and wiring penetrations.
• Thoroughly cleaned and sanitized the attic to remove allergens, contaminants, and odors, ensuring a healthier indoor environment.
• Installed rodent-proof barriers at potential entry points to prevent future infestations.
• Applied premium fiberglass insulation to an R38 level, significantly improving the attic’s ability to regulate indoor temperatures.
• Provided Jeffrey with before-and-after photos to showcase the improvements.
• Informed Jeffrey about our 6-month rodent re-entry guarantee for added peace of mind.

With this attic restoration, Jeffrey’s home will now maintain a stable and comfortable temperature year-round, reducing strain on his HVAC system. He will experience improved indoor air quality, lower utility bills, and a more energy-efficient home for years to come.

Carol reached out to us looking for help with her home’s temperature fluctuations and poor air quality. During our attic inspection, we uncovered the main issue: her attic contained only six inches of old, compacted fiberglass insulation, which is far below the Energy Star-recommended level for our Central Valley climate. To improve her home’s energy efficiency and overall comfort, we determined that a full attic restoration was the best course of action.

We took the following steps to restore the attic:

• Removed and properly disposed of the outdated fiberglass insulation.
• Sealed all visible air leaks using closed-cell foam, focusing on areas such as top plates, registers, recessed lighting, smoke detectors, and plumbing and wiring penetrations.
• Thoroughly cleaned and sanitized the attic to eliminate dust, allergens, and lingering odors, ensuring a healthier living environment.
• Installed rodent-proof barriers at potential entry points to prevent future infestations.
• Blown in premium fiberglass insulation to an R38 level, significantly enhancing the attic’s ability to maintain indoor temperatures.
• Provided Carol with before-and-after photos to highlight the improvements.
• Educated Carol about our 6-month rodent re-entry guarantee for added confidence and peace of mind.

As a result of this attic restoration, Carol’s home will now stay consistently comfortable throughout the seasons, reducing the strain on her HVAC system. She will benefit from improved indoor air quality, lower energy costs, and a more enjoyable living space for years to come.

Katherine contacted us looking for a solution to her home’s inconsistent temperatures and subpar air quality. Upon inspecting her attic, we discovered the primary issue: it had only four inches of outdated fiberglass insulation that was no longer providing adequate thermal protection. To enhance her home’s energy efficiency and overall comfort, we recommended a complete attic restoration.

We carried out the following steps to restore the attic:

• Extracted and disposed of the old, deteriorating fiberglass insulation.
• Sealed air leaks throughout the attic using closed-cell foam, targeting areas such as top plates, vents, recessed lighting, smoke detectors, and plumbing and wiring openings.
• Thoroughly cleaned and disinfected the attic to eliminate pollutants, allergens, and lingering odors, promoting a healthier indoor environment.
• Installed rodent-proof barriers at vulnerable entry points to deter future infestations.
• Applied high-quality fiberglass insulation to an R38 level, significantly enhancing the attic’s heat retention capabilities.
• Provided Katherine with before-and-after photos to illustrate the transformation.
• Informed Katherine about our 6-month rodent re-entry warranty for added assurance.

As a result of this attic restoration, Katherine’s home will now maintain a more consistent temperature year-round, reducing the workload on her HVAC system. She will experience better indoor air quality, decreased energy expenses, and a noticeably more comfortable living space for years to come.